Autel MaxiBAS BT608 BTAK Car Battery Tester & Electrical System Diagnostic Tool with Battery Tester Accessory Kit
MaxiBAS BT608 BTAK
The Autel MaxiBAS BT608 BTAK includes a BT608 car battery tester and full Battery Tester Accessory Kit (BTAK) is a premium bundle for technicians to safely and easily troubleshoot vehicle battery & electrical systems and components.
BT608 Battery Tester
Autel MaxiBAS BT608 - The FIRST Intelligent Wireless Automotive Battery Analyzer with All System Diagnostics! The BT608 Battery Tester can display a quick health status of the existing battery, register a new battery and perform advanced battery and electrical system diagnostics. With the VINscan function, the BT608 analyzer enables quick identification of the vehicle and battery specifications. Read/Clear codes on all available vehicles systems. Print or share customized reports via Wi-Fi or print test reports via the built-in thermal printer.
BTAK (Autel Battery Tester Accessory Kit)
Autel’s Battery Tester Accessory Kit (BTAK) includes the DM100 Digital Multimeter 400A Current Clamp, Probes, and Leads. Used with Autel’s MaxiBAS BT608 Battery Analysis tools, the BTAK enables technicians to safely and easily troubleshoot vehicle electrical systems and components. Includes Autel’s 400 Amp Current Clamp with an effective measurement range of 20mA to 400A AC/DC.
MaxiBAS BT608 BTAK Features
- Support in-vehicle and out-of-vehicle testing of passenger vehicle batteries
- Test 6- and 12-volt batteries: 100 - 3000 CCA
- Test 12- and 24-volt cranking/charging systems
- Test Flooded, AGM, AGM Spiral, EFB and GEL batteries
- Compatible with CCA, CA, SAE, EN, IEC, DIN, JIS and MCA
- One-touch Battery registration
- Quick display of battery specifications through battery barcode scan, Auto and manual VIN entry
- Illustration instruction guides for battery positioning and testing
- Print test reports via built-in thermal printer
- Read and erase codes of all available systems
- Digital Multimeter and Current Clamp Kit
- Measures Voltage, Current, and Resistance
- Includes 400 Amp Clamp, Probes and Leads
- Troubleshoot Electrical System
- Measures Battery Strength
- Effective Measurement Range of 20mA to 400A AC/DC
- One-Year Limited Warranty
Adaptive Conductance Technology
The BT608 Battery & Electrical System analyzer applies Adaptive Conductance to more accurately determine the health of battery than traditional battery testers.
- Auto-Adjust battery test algorithm for more accurate test results
- Diagnose low capacity batteries and almost completely discharged batteries
- Display how much board area is available for storing and transferring power
- Reduce battery misdiagnosis, reduce recharge and retest
Autel BT608: In-vehicle and out-of-vehicle test
Autel BT608 Battery Tester supports in-vehicle (battery test, starter, and generator test) and out-of-vehicle battery test.
BT608 car battery tester in-vehicle test used for testing batteries that are installed in a vehicle directly. Including battery test, starter test, and generator test.
Battery Types:
- Test 6- and 12-volt Batteries: 100 - 3000 CCA
- Test 12- and 24-volt Cranking/Charging Systems
Autel BT608 battery analyzer also supports test the condition of batteries that are not connected to a vehicle, just input the correct battery specifications based on the information printed on the battery’s label, verify battery type, battery standard, and battery capacity.
- Types: FLOODED, AGM, AGM SPIRAL, EFB, and GEL
- Standards: CCA, SAE, CA, EN, EN2, IEC, DIN, JIS, MCA, BCI, and GB
Autel BT608: Battery Registration and BMS Reset
Autel MaciBAS BT608 battery test scanner comes with Auto registration (after battery replacement), BMS reset and Electric appliance reset features to enable mechanics and DIYers to manage the battery systems easily and efficiently.
All System Diagnostic and Auto VIN
In addition to testing the battery and electrical system capabilities, the BT608 scan tool also comes with the latest VIN-based Auto VIN/ Scan features to perform a comprehensive scan of all available systems in the vehicle to read and clear trouble codes and retrieve DTCs. Live data and freeze frame data are also available.
Autel BT608: Car Battery Tester with Thermal Printer
Autel BT608 battery tester has a data review function that enables technicians to review the data recorded and print out the diagnostic report instantly with the built-in thermal printer for further analysis, also sharing reports by email is supported.
Autel BT608 Specifications
| Operating System: | Android 9.0 |
| Screen Display: | 5.5'' LCD touch screen with 720*1280 resolution |
| Storage: | 32 GB |
| Connectivity: | Wi-Fi (802.11 a/b/g/n/ac),USB 2.0, Type C, BT5.0+EDR |
| Camera: | 8 Megapixel |
| Input Voltage: | 5 V DC |
| Working Current: | 450 mA at 7.7 V DC |
| Internal Battery: | 7.7 V, 3000 mAh |
| CCA Range: | 100 to 3000 A |
| Voltage Range: | 1.5 to 36 V |
| Working Temperature: | 0° to 50° C (32° to 122° F ) |
| Storage Temperature: | -10° to 60° C (14° to 140° F ) |
| Dimension (L x W x H): | -204 mm x 90 mm x 32 mm (8.03” x 3.54” x 1.25”) |
| Weight: | 510 g (1.12 lb.) |
Autel BT608 BTAK Package List
- 1x BT608 Main Unit
- 1x Battery Tester Accessory Kit(BTAK)
- 1x MaxiCVI MV200 Series
- 1x Battery Clamp Cable
- 2x Paper Roll
- 2x Battery Side Post Terminal TYPE T
- 2x Battery Side Post Terminal TYPE S
- 1x Power Adapter
- 1x USB Cable