Autel MaxiIM IM608 Key Programming & Diagnostic Tool with IMMO XP400 Programmer, ECU Coding, All Systems Diagnosis and 23 Services

Autel MaxiIM IM608

Autel IM608 key programmer is a state of the art 10-inch Android-based touchscreen tablet combining the most advanced key programming and immobilizer capabilities with OE-level diagnostics and service functions. Equipped with XP400 key programmer and MaxiFlash JVCI ECU programmer, IM608 automotive scan tool is a comprehensive immobilizer and key programming tool. It is ideal for auto technicians and locksmiths. Upgraded verion of .

Autel MaxiIM IM608 Main Features

• Read & Clear Fault Codes | Short description & code provided (can clear faults & warning lights)
• Service Functions |  EPB, DPF, SAS, Oil Reset, BMS and TPMS Sensor ID Relearn, etc.
• Access Live Data | Data from the ECU/Modules/sensors displayed in real-time (Oxygen sensor-rich/lean etc)
• Actuation/Component Testing | Actuate (switch on/off) to diagnose functionality (relays, fans, locks etc)
• Coding Functions | Allows you to change vehicle parts that need to be ‘coded’ (Injectors, ABS, starters etc)
• Flashing/Reprogramming | Advanced updating/coding of ECU’s online through a J2534 pass-through flashing device
• Advanced Key Programming | IMMO functions, Transponder read/write/identify, MCU/EEPROM chip read/write

Autel MaxiIM IM608 Advanced IMMO & Key Programming

• Smart Mode：for Guided and Automated Key Learning
• Expert Mode：for Advanced Key Learning
• Read PIN / CS (All Key Lost)
• Generate Key
• Key Learning
• Remote Learning
• Backup / Restore IMMO Data
• IMMO ECU Reset / Adaptation
• IMMO ECU Refresh / Coding
• BENZ 3rd Generation IMMO Add Key, All Key Lost, Key Learning
• BMW FEM / BDC Key Learning and ECU Adaptation
• BMW CAS4/3/2 Key Learning
• VW / AUDI MQB Key Learning, 48 Transponder (96-bit) Add Key, All Key Lost,
• A6 All Key Lost, and More
• XP400 Key & Chip Programmer
• Support PC
• MCU / EEPROM Chips Read / Write
• ECU Read / Write
• MC9S12 Encryption Chip Read / Write
• Key Read / Write
• Mercedes Infrared Key Read / Write
• Remote Frequency Detect
• IC Card Read/Write

XP400 Key & Chip Programmer

• Support PC
• MCU / EEPROM Chips Read / Write
• ECU Read / Write
• MC9S12 Encryption Chip Read / Write
• Key Read / Write
• Mercedes Infrared Key Read / Write
• Remote Frequency Detect
• IC Card Read/Write

What Autel APB112 Can Do for You?

1. Smart key simulator
2. Compatible with IM608(Pro), IM508, and MX808IM
3. Compact but would need to be used with the XP400/XP400Pro
4. 46, 4D data collection
5. 46 smart key password calculation
6. 46 chip simulation
7. Toyota 4D (94/ D4, 98) smart key simulation
8. Toyota H (88/ A8, A9, 39) smart key simulation
9. Collects data from the ignition coil
10. Identify ignition coil troubles
11. Decode vehicle key chip data
12. Simulate vehicle key chip (ex - 4D chip)
13. Toyota/ Lexus smart key all key lost
14. Chip decoding (Hyundai 46)

What Can GBOX-2 Can Do For You?

1. Supports Mercedes Benz All Key Lost, faster calculate password
2. Supports IM608(Pro) or IM508 with XP400 Pro
3. Used for Faster Mercedes ECU data and EIS password calculation
4. Mercedes DAS3 can EIS/EZS all keys lost
5. Reduces reading time of W204 ECU data & W207 EIS by over 85%
6. No need to remove and reinsert the key for W221 & W164 after 2009 Models

What Can IMKPA Can Do For You?

1. Read/ Write/ Erase for Mercedes Benz ESL_W209/ W906 Data
2. Mercedes Benz NEC Key Learning
3. BMW EWS3 Key Learning and Volkswagen/ AUDI/ BMW/ Benz Key Unlock

All System Diagnostics & Advanced Service Functions (Work with the MaxiFlash JVCI (J2534 ECU Reprogrammer)

• Oil Service Reset
• Parking Brake Pad Relearn After Replacement
• Steering Angle Sensor Relearn
• Battery Registration and Reset
• Diesel Particulate Filter Regeneration
• Tire Pressure Monitoring System
• Active Test
• ECU Coding
• VW/Audi Component Protection
• Complete Service Functions

Autel MaxilM IM608 OE-Level Diagnosis For 80+ Vehicle Makes

• All Systems Diagnostics
• AutoVIN / AutoScan
• Read / Erase Codes
• View, Record and Playback Live Data
• View Freeze Frame Data
• Shop and Data Manager Applications
• MaxiFlash JVCI ECU Programmer (Bluetooth/USB cable)

Autel MaxiIM IM608 Specification:

IM608'S XP400 & J2534 Connection Instruction:

Autel MaxiIM IM608 Package List:

• 1x Autel MaxiIM IM608 Main Unit
• 1x APC101 USB Cable
• 1x APA101 Signal Cable
• 1x MaxiFlash JVCI
• 1x APB101+ APD101 (EEPROM Adaptor + EEPROM Adapter Shell)
• 1x APA103 (EEPROM Clamp)
• 1x XP400
• 1x APB102 MB IR Cable
• 1x APA104 ECU Clamp
• 1x Main Cable
• 1x APB104 (MCU_FQFP64)
• 1x APA105 (MCU Clamp)
• 1x USB Cable (2m)
• 1x APB105 MCU_FQFP80
• 1x APA106 (MC9S12 Clamp)
• 1x Mini USB Cable
• 1x APB106 (MCU_FQFP144)
• 1x APA107 (Connect Cable)
• 1x AC/DC 12V Adapter
• 1x APB107 (MCU_FQFP144)
• 1x Quick Reference Guide
• 2x Light Fuse 6*30mm
• 1x APB108 (MCU_FQFP176)
• 1x Packing List
• 1x Cigarette Lighter
• 1x APA002 (EEPROM Socket)
• 1x Carrying Case 634*170*404mm
• 1x AAC001

[video]

New Key Programming/IMMO Tools: IM608 & IM508